Test conditions for chassis/wheel alignment check (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Only BMW approved wheel and tire combinations are installed on the vehicle.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire pressure (see label on vehicle).
- All chassis and suspension components must be technically OK.
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.