18 32 Exhaust Gas Catalytic Converter (X5 M)
WARNING: This page is about a different car, the 2023 BMW X5 M, 2022 BMW X5 M, 2021 BMW X5 M, and 2020 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
1832 TIGHTENING TORQUE OVERVIEW
| Bottom catalytic converter | ||
| Nut M8 Replace nuts. |
tightening torque | 23 Nm |
| Bulkhead catalytic converter to catalytic converter near engine | ||
| Nut M8 Replace nuts. |
Tightening torque | 17 Nm |
| Tightening torque | 28 Nm | |
| Catalytic converter to cylinder head | ||
| screw | Tightening torque | 21.4 Nm |
| Catalytic converter to exhaust turbocharger | ||
| V-band clamp Replace V-band clamp. |
Tightening torque | 14 Nm |
| Exhaust turbocharger to exhaust manifold | ||
| V-band clamp Replace V-band clamp. |
Tightening torque | 9 Nm |
| Tightening torque | 20 Nm | |
| Top catalytic converter to bottom catalytic converter | ||
| V-band clamp Replace V-band clamp. |
Tightening torque | 14 Nm |