12 52 Plug Connections, Terminals, Loose Parts (X5 M)
WARNING: This page is about a different car, the 2023 BMW X5 M, 2022 BMW X5 M, 2021 BMW X5 M, and 2020 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
1252 TIGHTENING TORQUE OVERVIEW
| Cable splitter sensor system to the cylinder head cover | ||
| hexagon nut M5 | tightening torque | 5.5 Nm |
| Ground cable on cylinder head cover/ground pin | ||
| Nut M5 | tightening torque | 4.6 Nm |
| Ground cable splitter to the cylinder head cover | ||
| M6x14 screw | tightening torque | 10 Nm |
| Ground cable to hold-down device | ||
| Nut M5 | tightening torque | 5.5 Nm |
| Wiring harness section 5-8 to the cylinder head cover | ||
| M6x16 screw | tightening torque | 8 Nm |
| Wiring harness sensor system to the cylinder head cover | ||
| M6x16 screw | tightening torque | 8 Nm |
| Y-cable at housing | ||
| M5 Replace screws. |
tightening torque | 4.5 Nm |