1122 FLYWHEEL (230i and 230i xDrive coupe/convertible)
1122 FLYWHEEL - TIGHTENING TORQUE SPECIFICATION
| |
Type |
Thread |
Tightening specifications |
Dimension |
1AZ Hexagon bolts
Flywheel to crankshaft |
B42, B46, B48 |
M12x1.5 |
Replace screws.
Tightening torque and angle of rotation must be observed without fail. |
|
| 1. Tightening torque |
45 Nm |
| 2. Angle of rotation |
45° |