5434 Convertible Topping Assembly
5434 MOTOR-DRIVEN CONVERTIBLE TOPPING (ELECTRICAL COMPONENTS) - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Work instruction | Value | |
|---|---|---|---|---|
| 1AZ Soft top drive to soft top | F23 | 8 Nm | ||
| 2AZ Switch to soft top compartment lid mechanism | F23 | 1.2 Nm | ||
| 3AZ Mounting plate to body | F23 | 19 Nm | ||
| 4AZ Main bearing to mounting plate | F23 | 56 Nm | ||
| 5AZ Hall sensors to convertible top | F23 | 2.8 Nm | ||
| 6AZ Base plate (fastener lower section) | F23 | 8 Nm | ||
| 7AZ Soft top latch to soft top | F23 | 10 Nm | ||
| 8AZ Cable holder to soft top compartment lid mechanism | F23 | 2.8 Nm | ||
| 9AZ Retaining plate to hydraulic unit | F23 | 10 Nm | ||
| 10AZ Storage soft-top bow to body | F23 | 2.5 Nm | ||
| 11AZ Oil filler plug to hydraulic unit | F23 | 2 ±0.2 Nm | ||
| 12AZ Clamping profile, roofliner, to bow | F23 | 1.5 Nm | ||
| 13AZ Clamping strip to cowl panel | F23 | 8 Nm | ||
| 14AZ Tension cable on the convertible top setting | F23 | 1.5 Nm | ||
| 15AZ Spring to soft top frame | F23 | 2.8 Nm | ||
| 16AZ Seat belt guide loop for tension cable/tension cable to convertible top setting | F23 | 2.8 Nm | ||
| 17AZ Roofliner to roof tip | F23 | 1.5 Nm | ||
| 18AZ Rubber band to soft top frame | F23 | 2.8 Nm |