5412 Sunroof Assembly
5412 MECHANICAL COMPONENTS, SLIDE/TILT SUNROOF - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Glass slide/tilt sunroof panel | F20/F21/F22/F26/F30/F31/F32/F34/F35/F36/F80/F82/F87 | Replace screws. | 4.5 Nm | |
| 2AZ Slide/tilt sunroof unit to body | F20/F21/F22/F26/F30/F31/F32/F34/F35/F36/F80/F82/F87 | M6 | Self-tapping screw | 5.4 ±0.5 Nm |
| 3AZ Wire spring clip to wind deflector | F20/F21/F22/F26/F30/F32/F35/F36/F80/F82/F87 | 1.5 Nm | ||
| 4AZ Floating roofliner to slider (mechanism for floating roofliner) | F20/F21/F22/F26/F30/F32/F35/F36/F80/F82/F87 | Replace screws. Tighten screw with special tool 00 9 461 only. |
2.7 Nm | |
| F31/F34 | 1.8 ±0.2 Nm | |||
| 5AZ Glass slide/tilt sunroof panel, rear, to body | F31/F34 | Replace screws. | 4 Nm | |
| 6AZ Wind deflector to body | F31/F34 | 0.6 Nm | ||
| 7AZ Bracing plate to panorama roof frame | F34 | M5 | 5 Nm | |
| 8AZ Reinforcement plate to roller sunblind | F34 | 2 Nm | ||
| 9AZ Roller sunblind to panorama roof frame | F34 | 2 Nm |