Removing and installing control panel of heater/air conditioning system (2016-2022)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

IMPORTANT: Carry out installation in a dust-free workshop area only.
To avoid damage, do not touch or dirty the display field.

Necessary preliminary tasks:

Release screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock locking wedges (1) with a suitable tool (e.g. screwdriver - 3 mm blade) in upward direction.

Installation note:

Locking wedges (1) must be felt to engage.

Make sure locking wedges (1) are securely seated.

Unlock associated plug connection and disconnect.

Remove control panel for heater - air conditioning system (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Locking wedges (1) must not be damaged.

Courtesy of BMW OF NORTH AMERICA, INC.