Removing and installing or replacing cover on door handle, front left or right (2016-2022)
Special tools required:
- 009321
IMPORTANT:
Risk of damage!
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Insert special tool 00 9 321 from below into recess of cover (1).
Lever out cover (1) with special tool.00 9 321 at clamps (2).
Feed out cover (1) downwards from retaining hooks (3).
Installation note:
Firstly feed in cover (1) with retaining hook (3) into door trim panel, then clip into door trim panel.
Installation note:
Following parts of cover must not be damaged or missing.
- Latch mechanism
- Clamps
- Retaining hook