Install the bottom left B-pillar trim panel

Install the lower B-pillar trim panel 

• Insert the B-pillar trim panel (1)  and connect the associated connector, if applicable.
• With IHKA control panel (SA4NB) with 4-zone control: 

  Make sure the B-pillar trim panel (1)  is correctly positioned at the air duct.

• Engage the B-pillar trim panel (1)  in the clips (2)  .
• Check the B-pillar trim panel (1)  for correct fit in relation to the front and rear edge protection.

Courtesy of BMW OF NORTH AMERICA, INC.