1112 CYLINDER HEAD WITH LID (M760i xDrive 2017-2022)
1112 TIGHTENING TORQUE OVERVIEW
| Coolant connection to cylinder head | ||
| Connection M7 | Tightening torque | 0.8 Nm |
| Cylinder head bolt M11x175 | ||
| M11 Replace screws. |
Joining torque | 30 Nm |
| 1. Angle of rotation | 90° | |
| 2. Angle of rotation | 140° | |
| Cylinder head bolt to outer timing case cover | ||
| M6x40 Replace microencapsulated screw. |
15 Nm | |
| Cylinder head bolt to timing case cover | ||
| M8x30 Replace microencapsulated screws. |
tightening torque | 24 Nm |
| Cylinder head cover, left to cylinder head | ||
| M6x30 | Tighten all screws in the order 1 to 25. | 10 Nm |
| M6x40 | Tighten all screws in the order 1 to 25. | 10 Nm |
| Cylinder head cover, right to cylinder head | ||
| M6x30 | Tighten all screws in the order 1 to 24. | 10 Nm |
| M6x40 | Tighten all screws in the order 1 to 24. | 10 Nm |
| Flange to assembly jig | ||
| M14X30 | Tightening torque | 135 Nm |
| Special tool to cylinder head | ||
| M11x175 | Tightening torque | 15 Nm |