Remove the DME control unit of cylinders 5 to 8

Preliminary work 

• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to REMOVING THE COVER PANEL OF THE LEFT DME CONTROL UNIT .

• Unlock and disconnect plug connections (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the cable bracket (1)  upwards.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen wiring harness fasteners (1)  and (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock the adapter plate at the detents (1)  and remove in an upward direction.
• Remove the Digital Motor Electronics control unit (2)  towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.