Remove the support for bumper cover
Preliminary work
- Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to ON VERSION WITH COMPACT SPARE WHEEL: REMOVING THE STORAGE TRAY .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON LEFT .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING BOTH TAIL LIGHTS FROM THE SIDE PANEL .
- Refer to REMOVING THE TRIM FROM THE REAR BUMPER PANEL .
- Refer to REMOVING BOTH EXHAUST TAILPIPE TRIMS .
- Refer to REMOVING REAR BUMPER PANEL .
- Refer to REMOVING THE TOP SENSOR LINE FOR THE CONTACTLESS TRUNK OPENING .
- Refer to REMOVING THE BOTTOM SENSOR LINE FOR THE CONTACTLESS TRUNK OPENING .
- Refer to REMOVING THE CONTROL UNIT FOR THE CONTACTLESS TRUNK OPENING .
- Refer to REMOVING THE BOTTOM REAR BUMPER GUIDE .
- Loosen nuts (1) .
- Release nuts (2) and remove support for bumper cover (3) .