Installing the luggage compartment wheel arch trim panel on the right
Installing the luggage compartment wheel arch trim panel on the right
- Feed in trunk wheel arch panel.
- Install the eye bolt (2).
- Tighten down screw (3).
TIGHTENING TORQUE SPECIFICATIONS
| Lashing point to body | ||
| Tightening torque | 17 Nm | |
- Install the trim (1) with the eye bolt (2).
- Install the storage compartment (1).
- Install the expanding rivet (2).
- Insert the cover (1).
Follow-up work
- Refer to INSTALLING LOADING EDGE TRIM .
- Refer to INSTALLING THE COMPACT SPARE WHEEL STORAGE TRAY .
- Refer to INSTALLING THE STORAGE TRAY .
- Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .