Remove the seat belt finisher strip
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING REAR SEAT BENCH .
- Refer to REMOVING REAR SEAT BACKREST .
- Refer to REMOVING C-PILLAR TRIM PANEL .
- Loosen screw (1).
- Remove end lining (2).
- Detach the seat belt finisher strip (1) toward the front and out of the clips (2).
- Thread out the seat belt finisher strip (1) towards the front and top and out of the guides (3).
- Thread out the end lining and remove seat belt finisher strip (1).