1161 INTAKE SYSTEM (740e PHEV xDrive 2017-2019)
1161 INTAKE MANIFOLD
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake manifold to cylinder head | All | M8 | 22 Nm | |
| All | M7 | 15 Nm | ||
| All | M6 | 10 Nm | ||
| 2AZ Sound absorption cover to holder | M60/1/M60/2/M62 | M6 | 8 Nm | |
| 3AZ Throttle valve to intake manifold | N73 | M6x60/M6x80 | 8 Nm |
1161 TIGHTENING TORQUE OVERVIEW
| Holder for intake plenum to cylinder head/crankcase | ||
| M6 | Tightening torque | 10 Nm |
| Holder for intake system to cylinder head/crankcase | ||
| M6 | Tightening torque | 10 Nm |
| Holder for wiring harness to intake plenum | ||
| Tightening torque | 5 Nm | |
| Holder for wiring harness to intake system | ||
| screw | Tightening torque | 5 Nm |
| Intake plenum holder on engine | ||
| BM6x16 | Tightening torque | 10 Nm |
| Intake plenum to rear/front holder | ||
| Tightening torque | 8 Nm | |
| Intake system to holder front/rear | ||
| Tightening torque | 8 Nm | |
| Tank vent line to intake plenum | ||
| Tightening torque | 5 Nm | |
| Tank vent line to intake system | ||
| Tightening torque | 5 Nm | |