1131 CAMSHAFT (750i xDrive 2016-2022)
1131 TIGHTENING TORQUE OVERVIEW
| Bearing screw to engine block | ||
| Bearing screw M10x1.25 Replace the bearing screw. Clean the thread in the engine block with a screw tap. |
Tightening torque | 46 Nm |
| Bearing screw to engine block | ||
| Bearing screw M8x1.25 Replace the bearing screw. Clean the thread in the engine block with a screw tap. |
Tightening torque | 20 Nm |
| Chain tensioner to cylinder head | ||
| screw | Tightening torque | 13 Nm |
| Collar screw to the slide rail | ||
| Collar screw M6x48 | Tightening torque | 10 Nm |
| Flat-head screw to the slide rail | ||
| Flat-head screw M6x67 | Tightening torque | 10 Nm |
| Preload timing chain | ||
| tightening torque | 0.6 Nm | |
| Slide rail to cylinder head | ||
| Bearing screw | Tightening torque | 25 Nm |