1111 ENIGINE BLOCK (740e PHEV xDrive 2017-2019)
1111 TIGHTENING TORQUE OVERVIEW
| Bearing journal of tensioning and guide rail | ||
| M8 | 20 Nm | |
| Camshaft wheel with bearing to crankcase | ||
| M12x1.5 | 108 Nm | |
| Chain tensioner to crankcase | ||
| M6x22 | 10 Nm | |
| Main bearing cap to crankcase | ||
| M10x1.5 Replace screws. |
1. Joining torque | 25 Nm |
| 2. Angle of rotation | 60° | |
| 3. Angle of rotation | 60° | |
| Special tool/holder to crankcase | ||
| M10x35 | 40 Nm | |
| Special tool 11 8 930 to special tool 00 2 320 | ||
| M14x35 | tightening torque | 160 Nm |
| Special tool 2 413 082 to special tool 00 2 320 | ||
| M12x65 | Tightening torque | 100 Nm |