Install bumper cover, front

• Install the bumper cover (1).
• Engage the bumper cover (1) in the area of the upper active air-flap control (2) in the mountings.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connector (1) on the right side and lock it.
• Attach plug connection (1) in holder (2).
• Connect the hose for the headlight cleaning system.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Description is for left component only. Procedure on the right side is identical.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper cover on side wall
  Screw	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING FRONT SECTION OF THE FRONT WHEEL ARCH COVER (PARTIALLY REMOVED) .