11 22 Flywheel
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - FLYWHEEL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Flywheel to crankshaft (automatic transmission) | N55 | M12x 19 | Replace screws | |
| 1. Jointing torque | 60 Nm | ||||
| 2. Final tightening | 45 ° | ||||
| 2AZ | DM flywheel to crankshaft (manual transmission) | N55 | M12x 25 | Replace screw | |
| 1. Jointing torque | 60 Nm | ||||
| 2. Final tightening | 45 ° | ||||