33 00... Rear axle: wheel alignment check must be carried out after the following work (M6)

Fig 1: Identifying Rear Axle Components

Courtesy of BMW OF NORTH AMERICA, INC.

Graphic F01/F02.

A WHEEL ALIGNMENT CHECK must be carried out after the following work:

• Release the following screw connection: 
  • Swinging arm, front/rear, to rear axle support
  • Swinging arm to integral link/wheel carrier
  • Guide arm to rear axle support/HSR unit
  • Wishbone to rear axle support/wheel carrier
• Replacement of following parts: 
  1. Rear axle support
  2. HSR actuator
  3. Toe arm
  4. Swinging arm
  5. Wheel carrier
  6. Integral link
  7. Wishbone