33 17 Rear axle differential mountings
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE DIFFERENTIAL MOUNTINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential to rear axle carrier, front | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | FOLLOW REPAIR INSTRUCTION
. Replace screws. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25/F26 | M12 | Follow repair instruction. | 100 Nm | ||
| 2AZ | Rear differential to rear axle carrier, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | FOLLOW REPAIR INSTRUCTION
. Replace nut. |
175 Nm |
| F25/F26 | M14 | Follow repair instruction. Replace nut. |
165 Nm | ||
| 3AZ | Vibration absorber on front right rear axle final drive | F10/F11 | M12 | Replace nut. | 56 Nm |
| 4AZ | Vibration absorber to vibration absorber holder | F25/F26 | M14 | 100 Nm | |
| 5AZ | Front adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace screws. | 120 Nm |
| 6AZ | Rear adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | 120 Nm | |