33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bracket, anti-roll bar to rear axle support | F01/F02/F03/F04/F07/F06/F10/F11/F12/F13/F18 | M10 | Replace screws. | 56 Nm |
| F25/F26 | M8 | Replace screw. | 34 Nm | ||
| 2AZ | Anti-roll bar link to anti-roll bar/swinging arm | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 | Replace nuts. | 56 Nm |
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |||
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Vibration absorber to anti-roll bar bracket | F01/F02/F06/F07/F10/F11/F12 | Replace screw. | 19 Nm | |
| 4AZ | Anti-roll bar link to wheel carrier | F25/F26 | M10 | Replace screw. | 56 Nm |