17 21 500 Flushing Transmission Oil Cooler And Lines (Automatic Transmission)
Special tools required:
Installing a new or exchange transmission.
Flushing can only be carried out when the automatic transmission is removed.
Procedure:
Automatic transmission removed.
Connect appropriate adapters (see description below) to oil lines exiting from automatic transmission.
Use quick-release coupling to connecting line 17 2 019 from oil dispenser unit.
Use quick-release coupling to connect drain line 17 2 018 .
Hold and direct open end of drain line into a suitable collecting vessel.
Using oil dispenser unit, flush approx. 1 liter of transmission fluid (refer to OPERATING FLUIDS ) through oil lines and transmission oil cooler.
Reposition quick-release coupling.
Flush oil lines/transmission oil cooler in opposite direction with approx. 1 liter of transmission fluid (refer to OPERATING FLUIDS ).
Disconnect quick-release coupling.
Remove adapter.
Do not reuse under any circumstances.
Arrangement of flushing device for transmissions A5S 310Z, A5S 560Z, A5S 360R/390R, A4S 200R, A5S 325Z
Arrangement of flushing device for transmission A4S 310R
Arrangement of flushing device for transmission A4S 300J
Arrangement of flushing device for transmission A5S 440J