LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> 650i 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 808 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 133 Removing and installing/replacing drive for Soft Close Automatic on rear lid (soft closure aid)

51 24 133 Removing and installing/replacing drive for Soft Close Automatic on rear lid (soft closure aid)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Release screws (2) and feed out drive (3).

Tightening torque 51 24 9AZ

Fig 1: Identifying Rear Lid Trim Panel, Plug Connection And Screw
G06885658Courtesy of BMW OF NORTH AMERICA, INC.

Feed Bowden cable out of REAR LID LOCK .

Installation: 

Make sure Bowden cable (1) is correctly positioned in rear lid.

Lay Bowden cable (1) without kinks.

Fig 2: Identifying Bowden Cable
G06885659Courtesy of BMW OF NORTH AMERICA, INC.