51 45... Removing and installing/replacing left cover on instrument panel
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.
Pull off seal (1) in the area of the instrument panel cover (2).
Unclip instrument panel cover (2) at the side, as illustrated, using special tool 00 9 325 .
Different versions:
Graphic A shows cover version up to 12/2009
Graphic B shows cover version from 12/2009
Installation note:
Retaining tabs on cover (1) or (1) and (2) must not be damaged or missing.
Replacement
Only applies to F07 up to 12/2009
As only the new version of the cover (Graphic B) is obtainable from the BMW Parts Department, remove retaining tab (2) before fitting as shown in Graphic A.