LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> 650i 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 808 (Body Equipment - Repair) >> Gaskets/Seals, Loose Body Components >> 51 71 015 Removing and installing/replacing left or right underbody panelling

51 71 015 Removing and installing/replacing left or right underbody panelling

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Graphic is only an example. There may be differences in specific details depending on engine version.

Unscrew all bolts.

Tightening torque 51 75 1AZ .

Remove underbody panelling (1).

Installation note: 

Make sure underbody panelling (1) is correctly seated.

Fig 1: Locating Underbody Panelling Bolts
G06889872Courtesy of BMW OF NORTH AMERICA, INC.