23 11 614 Replacing guide tube for clutch operator (GS6-53BZ)
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2016 BMW M5, 2016 BMW 535i, 2015 BMW M5, 2015 BMW 535i, and 2014 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
(gearbox removed)
Necessary preliminary tasks:
- Remove CLUTCH RELEASE BEARING AND RELEASE LEVER from guide tube
Release screws.
Remove guide tube (1).
IMPORTANT:
Guide tube is coated with Teflon and must not
be greased.
Installation note:
Clean thread.
Install screws with Loctite 243.
Tightening torque 23 11 2AZ .
NOTE:
Remove sticker (1) and adhesive with a suitable solvent.