23 14 561 Removing/replacing zero gear sensor

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2016 BMW M5, 2016 BMW 535i, 2015 BMW M5, 2015 BMW 535i, and 2014 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After installing the zero-gear sensor, it is necessary to teach in the position of the zero-gear sensor again.
Calibration is carried out using the BMW Diagnosis System "Service Function" (Learn/record zero-gear sensor).

Necessary preliminary tasks:

REMOVE TRANSMISSION .

Disconnect plug connection (1) on zero gear sensor.

Unfasten screws (2).

Tightening torque 23 14 2AZ .

Remove zero gear sensor.

Installation note:

Replace screws (2).

Fig 1: Identifying Plug Connection On Zero Gear Sensor And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.