22 11 100 Replacing right engine support arm (N55)

Necessary preliminary tasks: 

• Secure engine in INSTALLATION POSITION
• Remove rear underbody protection. See 51 47 491 REMOVING REFITTING/REPLACING REAR ENGINE UNDERCOVER .
• Remove STIFFENING PLATE

Unfasten screw (1)

Fig 1: Identifying Screw Of Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove engine support arm.

Tightening torque 22 11 3AZ .

Fig 2: Identifying Screws Of Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.