Removing or installing/replacing the sound insulation of the upper part of the firewall (330i xDrive Wagon, 328d xDrive Wagon, 330i GT xDrive, 340i GT xDrive)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove TRAILING LINK on spring strut dome.
Detach positive wire from sealing (2).
Release expansion rivet (1).
Unclip sealing (2) in direction of arrow.
Release screws (1).
Feed out sound insulation of upper part of firewall (2).
Installation note:
The gasket at the bottom of the sound insulation of the upper part of the firewall (2) must not be damaged.