Removing and installing/replacing weatherstrip on inner front door (330i xDrive Wagon, 328d xDrive Wagon)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2019 BMW 340i GT xDrive, 2019 BMW 330i xDrive, 2019 BMW 330i GT xDrive, 2018 BMW 340i GT xDrive, and 2018 BMW 330i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 325
Necessary preliminary work:
- Remove COVER on door handle.
Release screws (1).
Tightening torque 51 41 1AZ .
Mask front door in working area of special tool 00 9 325 with plastic adhesive tape.
IMPORTANT:
Slide in special tool 00 9 325 between door trim panel and door and fit directly on clip mounting.
Detach door trim panel with special tool 00 9 325 in area A-pillar/mirror triangle starting at clips (2).
Pull off door trim panel from clamps (3).
Pull out weather strip (1).