Install the connecting support with the tension strut
- Position the connecting support with the tension strut (3).
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Tension strut with connecting support to body M8
tightening torque24 Nm - Replace screws (2).
Parts: Bolts
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Tension strut with connecting support to compression strut | ||
| M8 Replace screws. |
Jointing torque | 100 Nm |
| Angle of rotation | 90° | |