13 62 ENGINE CONTROL SENSORS (430i, 430i xDrive, 430i GranCoupe, 430i GranCoupe xDrive)
13 62 SENSORS FOR CONTROL UNIT - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Camshaft sensor to cylinder head cover | B48 | TS5x20 | 4 Nm | |
| 2AZ Crankshaft sensor to crankcase | B48 | M6 | 4.5 Nm | |
| 3AZ Charging pressure sensor to charge air line | B48 | TS5x20 | 4 Nm | |
| 4AZ Temperature sensor to charge air line | B48 | 2 Nm | ||
| 5AZ Knock sensor to crankcase | B48 | M8x30 | 21.5 Nm | |
| 6AZ Charging pressure sensor on intake plenum | B48 | TS5x20 | 4 Nm | |
| 7AZ Hot film air mass meter on intake silencer | B48 | TS4x16 | 1.5 Nm | |
| 8AZ Component temperature sensor on cylinder head, front | B48 | 2 Nm | ||
| 9AZ Coolant temperature sensor to crankcase | B48 | 13.5 Nm | ||
| 10AZ Differential pressure sensor to holder | 8 Nm |