11 61 INTAKE SYSTEM (430i, 430i xDrive, 430i GranCoupe, 430i GranCoupe xDrive)
11 61 INTAKE PLENUM - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake plenum to cylinder head | B42S20O0/B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 2AZ Holder for intake plenum to cylinder head/crankcase | B42S20O0/B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 3AZ Rear intake plenum holder | B42S20O0/B46M0/O0/B48M0/O0 | M6 | 10 Nm | |
| 4AZ Intake plenum to rear/front holder | B42S20O0/B46M0/O0/B48M0/O0 | 8 Nm | ||
| 5AZ Holder for wiring harness to intake plenum | B42S20O0/B46M0/O0/B48M0/O0 | 5 Nm | ||
| 6AZ Tank vent line to intake plenum | B42S20O0/B46M0/O0/B48M0/O0 | 5 Nm |
11 61 INTAKE MANIFOLD - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake manifold to cylinder head | All | M8 | 22 Nm | |
| All | M7 | 15 Nm | ||
| All | M6 | 10 Nm | ||
| 2AZ Sound absorption cover to holder | M60/1/M60/2/M62 | M6 | 8 Nm | |
| 3AZ Throttle valve to intake manifold | N73 | M6x60/M6x80 | 8 Nm |