Removing and installing/replacing rear acoustic cover (corrosion protection) (B46/B48 4-Cyl. Engine) (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Necessary preliminary work: 

• Remove CENTER BULKHEAD UPPER PART SOUND INSULATION .

Removal: 

Feed out acoustic cover (1) upwards, out of the guides in the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Position the acoustic cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install CENTER BULKHEAD UPPER PART SOUND INSULATION .
• Add final details to vehicle