Removing catalytic converter
Preliminary work
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING THE LAMBDA OXYGEN SENSOR .
- Refer to REMOVING THE OXYGEN SENSOR MONITOR .
- Refer to REMOVING THE FRONT UNDERBODY PROTECTION
- Refer to REMOVE THE CONNECTING SUPPORT .
- Refer to REMOVE THE CONNECTING SUPPORT WITH THE TENSION STRUT .
- Refer to REMOVE EXHAUST SYSTEM .
WARNING:
Hot surfaces
.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
CAUTION:
Heavy component
.
Heavy components can lead to injury or damage .
Heavy components can lead to injury or damage .
- Remove and install heavy components with the aid of another person/other persons.
CAUTION:
Component with heavy weight
.
Injury hazard!
Injury hazard!
- Note component's center of gravity.
- Support component using a jack.
- Secure component against falling off the jack.
- Loosen V-band clamp (1) .
- Loosen nuts (1) .
- Unlock and loosen clamp (1) .
- Feed out catalytic converter and remove.