11 22 FLYWHEEL (430i, 430i xDrive, 430i GranCoupe, 430i GranCoupe xDrive)
11 22 FLYWHEEL - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Hexagon bolts Flywheel to crankshaft (manual transmission) |
B42, B46, B48 | M12x1.5 | Replace screws. Joining torque and tightening torque must be observed without fail. |
|
| 1. Tightening torque | 45 Nm | |||
| 2. Angle of rotation | 45° |
| Flywheel to crankshaft (automatic transmission) | ||
| M12 x 1.5x25.5 Replace screws. |
Tightening torque | 120 Nm |