11 00 ENGINE (440i, 440i xDrive, 440i GranCoupe, 440i GranCoupe xDrive)
1100 TIGHTENING TORQUE OVERVIEW
| Engine mounting bracket on assembly jig | ||
| M14x95 | Tightening torque | 130 Nm |
| Engine mount to engine mounting bracket | ||
| Hexagon screws from special tool set | Tightening torque | 105 Nm |
| Motor mount on the engine stand | ||
| M10 | Tightening torque | 100 Nm |
| Special tool 2 318 635 on special tool 00 6 041 | ||
| M8 | Tightening torque | 19 Nm |
| Standard screw connection 4 Nm | ||
| Oval-head screw | Tightening torque | 4 Nm |
| Standard screw connection hose clamp 5 | ||
| Hose clamp L12 - L15 | tightening torque | 1.25 Nm |
| Standard screw connection MIO | ||
| M10 | 38 Nm | |
| Standard screw connection M5 | ||
| M5 | 5 Nm | |
| Standard screw connection M6 | ||
| M6 | Tightening torque | 8 Nm |
| Standard screw connection M7 | ||
| M7 | 13 Nm | |
| Standard screw connection M8 | ||
| M8 | Tightening torque | 19 Nm |