Removing and installing/replacing the rear left or right belt feed trim (4' Series Gran Coupe Sedan)
Necessary preliminary work:
- Remove C-PILLAR TRIM PANEL
- Remove the D-PILLAR TRIM PANEL
Detach trim panel (1) from the clips (2) in a downwards motion.
Installation note:
Replace faulty clips (2).
Lift trim panel (1) out of clamps (2).
Remove trim panel (1) together with trim panel (3).
Replacement:
Release trim panel (1) from latch mechanisms (2), and remove in direction of arrow.
Installation note:
Replace faulty clamps (3) on trim panel (4).
Install trim panel (1) together with trim panel (4).