Removing and installing/replacing guide for the bumper panel, rear left or right (4' Series Coupe/Convertible)

Necessary preliminary tasks: 

• Remove REAR BUMPER TRIM .

Release screws (1).

Tightening torque 51 12 3AZ .

Unscrew nuts (2).

Tightening torque 51 12 3AZ .

Remove guide (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Latch mechanisms (2) and gasket (3) of the guide (1) must not be damaged or missing.

Courtesy of BMW OF NORTH AMERICA, INC.