Installing sound insulation at the center of the bulkhead upper part

• Check the seal on the bottom of the sound insulation (2) for damage, replace if necessary.
• Position the sound insulation (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Sound insulation on bulkhead upper part
  Screw tightening torque	8.0 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the sealing (2) in the direction of arrow.
• Fasten expanding rivet (1).
• Secure positive battery cable at the sealing (2).

Courtesy of BMW OF NORTH AMERICA, INC.