Remove tank vent valve
Prerequisite:
- Ignition is switched off.
Preliminary work:
- Refer to REMOVING THE ACOUSTIC COVER .
NOTE:
RISK OF DAMAGE
Electrostatic discharge .
Damage to or destruction of electrical components .
Electrostatic discharge .
Damage to or destruction of electrical components .
- Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
- Read and comply with user information on using the associated special tool 12 7 060.
- Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
- Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
- For additional information see notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .
- Unlock and loosen connector (1) .
- Unlock and release the tank vent lines (see arrows in illustration).
- Detach and remove the tank vent valve (2) from the holder (3) .