11 61 INTAKE SYSTEM (440i, 440i xDrive, 440i GranCoupe, 440i GranCoupe xDrive)
11 61 INTAKE MANIFOLD - TIGHTENING TORQUE SPECIFICATION
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ Intake manifold to cylinder head |
All |
M8 |
|
22 Nm |
| All |
M7 |
|
15 Nm |
| All |
M6 |
|
10 Nm |
| 2AZ Sound absorption cover to holder |
M60/1/M60/2/M62 |
M6 |
|
8 Nm |
| 3AZ Throttle valve to intake manifold |
N73 |
M6x60/M6x80 |
|
8 Nm |
| Front/rear support for intake system to engine block |
| M6x16 |
10 Nm |
| Intake plenum to cylinder head |
| Observe tightening sequence. |
Joining torque |
5 Nm |
| |
Tightening torque |
10 Nm |
| Intake plenum to rear/front support |
| BM6 x 25 |
10 Nm |
| Tank vent line to intake plenum |
| TS5x16 |
5 Nm |
| Wiring harness to intake plenum |
| |
5 Nm |