11 36 VARIABLE CAMSHAFT TIMING CONTROL (440i, 440i xDrive, 440i GranCoupe, 440i GranCoupe xDrive)
1136 TIGHTENING TORQUE OVERVIEW
| Camshaft sensor wheel to intake camshaft | ||
| M4x35 | 4.5 Nm | |
| VANOS central valve to camshaft | ||
| M12x1 | 1. Tightening torque | 30 Nm |
| 2. Tightening torque | 50 Nm | |
| 3. Angle of rotation | 65° | |
| M21 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Tightening torque | 50 Nm |
| 2. Tightening torque | 115 Nm | |
| M22 VANOS central valve on the thread and on the contact surface must be coated with engine oil. |
1. Tightening torque | 50 Nm |
| 2. Tightening torque | 140 Nm | |