11 36 VARIABLE CAMSHAFT TIMING CONTROL (430i, 430i xDrive, 430i GranCoupe, 430i GranCoupe xDrive)
11 36 VANOS - TIGHTENING TORQUE SPECIFICATION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake and exhaust VANOS, central bolt to camshaft | B38/B48 A (until 10/2015)/B46 A (until 10/2015) | M 12x1 | ||
| 1. Join | 30 Nm | |||
| 2. Join | 50 Nm | |||
| 3. Angle of rotation | 65° | |||
| 1AZ Intake and exhaust VANOS, central bolt to camshaft | B38/B48 B/B46 B/B46A/B48 A (from 11/2015-01/2017) | M22x1 Coat the VANOS central valves on the thread and on the contact surface with fresh engine oil. |
||
| 1. Join | 50 Nm | |||
| 2. tightening torque | 140 Nm | |||
| 1AZ Intake and exhaust VANOS, central bolt to camshaft (SWZ 2 450 487) | B38/B48 B/B46 B/B48 A B46 A (from 01/2017) | M21x1 Coat the VANOS central valves on the thread and on the contact surface with fresh engine oil. |
||
| 1. Join | 50 Nm | |||
| 2. tightening torque | 140 Nm | |||