Install the oil vacuum pump

Check 

• Check the correct position of the lining sleeves (1)  and whether or not they are damaged.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » Lining sleeves (1)  are damaged or missing.

  Measure

  • Replace the lining sleeves (1)  .
• Replace sealing ring (1)  .

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert oil vacuum pump (1)  into the drive chain (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the oil vacuum pump (2)  correctly on the fitting sleeves.
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Oil pump to crankcase
  External Torx socket M8x35	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to REFITTING ENGINE OIL PAN .
• Refer to TIGHTENING THE OIL DRAIN PLUG .
• Refer to INSTALLING STARTER MOTOR .
• Refer to RAISING FRONT AXLE SUPPORT .
• Refer to TOPPING UP THE ENGINE OIL .
• Refer to CHECKING ENGINE OIL LEVEL .