Removing and installing/replacing both multifunction steering wheel switches (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Necessary preliminary tasks: 

• Remove AIRBAG UNIT .

Release screws (1) on left/right on back of steering wheel (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Remove both multifunction steering wheel switches (2) together with cover from steering wheel in direction of arrow.

Installation note: 

Make sure multifunction steering wheel switch (2) is fitted correctly.

Make sure electrical wiring (3) is correctly routed.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove switch of multifunction steering wheel (1) from cover (2).

Installation note: 

Make sure electrical wiring is correctly routed.

Courtesy of BMW OF NORTH AMERICA, INC.