34 51 Mechanical-Hydraulic Components
34 51 SLIP CONTROL SYSTEM - TIGHTENING TORQUE SPECIFICATION (DSC)
| Type | Thread | Tightening specifications | Value | |
|---|---|---|---|---|
| 1AZ Control unit to hydraulic control unit | F20/F21/F22/F30/F31/F32/F33/F34/F35 | Replace screws. | 2 Nm | |
| 1AZ Control unit to hydraulic control unit DSC MK 100 |
F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | Replace screws. | 5.5 Nm | |
| 2AZ ICM control unit on holder | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 8 Nm | ||
| 3AZ Pulse generator to swivel bearing/wheel carrier | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 8 Nm | ||
| 4AZ Holder on hydraulic unit | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 8 Nm | ||
| 5AZ Bracket, hydraulic unit to body | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 8 Nm |