Removing and installing/replacing trim panel for pedal mechanism (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

Release screw connection (1).

Tightening torque 51 45 8AZ .

Release trim panel (2) at clamps (3).

Lower trim panel (2) slightly and disconnect plug connections behind.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Clamps (1) and guides (2) must not be damaged.

Feed guides (2) correctly into the corresponding holder in the vehicle.

Replacement (depending on version): 

• Remount SPEAKER FOR HANDS-FREE SYSTEM (3) .
• Remount FOOTWELL LIGHT (4) .

Courtesy of BMW OF NORTH AMERICA, INC.