Removing and installing/replacing damper for glove box (4' Series Coupe/Convertible, 4' Series Gran Coupe Sedan)

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary work:

NOTE: For better illustration, the damper has already been disconnected from the retaining bracket.

Unclip damper (1) from retaining bracket (2) and slide back in direction of arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Turn damper (1) approx. 90° in direction of arrow and disconnect.

Courtesy of BMW OF NORTH AMERICA, INC.